Tarvitsetko tarjousasiantuntijan apua? Katso tarjousten valmistelupalvelumme
Tarjouskilpailut

Repair of asphalt roads in Jõgeva municipality 2026

Suljettu

Jättömääräaika on umpeutunut

Tämän tarjouskilpailun jättömääräaika on umpeutunut, eikä se enää ota vastaan hakemuksia. Alla olevat tiedot säilytetään viitteellisinä.

Selaa aktiivisia tarjouskilpailuja
Määräaika
Päättynyt
1. huhtikuuta 2026
Sopimuksen tiedot
Kategoria
Rakentaminen
Viite
307460
Arvo
€48,000
Sijainti
Estonia, Viro
Julkaistu
13. maaliskuuta 2026
Organisaatio
CPV-koodi
Arviointikriteerit
Cost of patching holes and cracks per ton (EUR/ton), as indicated in Appendix 1 - cost table100%
Projektin aikataulu

Tarjouskilpailu julkaistu

13. maaliskuuta 2026

Kysymysten jättämisen määräaika

25. maaliskuuta 2026

Tarjousten jättämisen määräaika

1. huhtikuuta 2026

Tarjousten avaaminen

1. huhtikuuta 2026

Sopimuksen alkamispäivä

15. huhtikuuta 2026

VoittotodennäköisyysPRO
🔒
Päivitä Professional-tasolle
Näe arvioitu voittotodennäköisyytesi historiallisen datan perusteella.
Päivitä ammattilaiseksi →
Ostajan tiedusteluPRO
🔒
Avaa ostajan tiedustelu
Näe kulutusmallit, suositellut menettelyt ja paljon muuta.
Päivitä ammattilaiseksi →
Toimialan näkemyksetPRO
🔒
Avaa toimialan näkemykset
Näe keskimääräiset voittajahinnat, kilpailutasot ja markkinatrendit.
Päivitä ammattilaiseksi →
Budjetti
€48,000
Kesto
Ei määritelty
Sijainti
Estonia
Tyyppi
Rakentaminen
75
Laatupisteet/100
Hyvä
Markkinoiden vertailu
Keskim. voittajahinta
€524,963
Keskim. tarjoukset
4.7
Kilpailu
Keskitaso
PK-yritys voittajat
94%
5,932 analysoitua tarjouskilpailua

Alkuperäinen tarjouskilpailun kuvaus

Repair of potholes and cracks on local roads in Jõgeva municipality using the chip seal method in 2026.
Sähköinen jättö

Suorita riskianalyysi

Tunnista mahdolliset riskit, epäjohdonmukaisuudet ja varoitusmerkit kaikista tarjousasiakirjoista. Saat yksityiskohtaisen riskiraportin, jossa on vakavuustasot ja lievennyssuositukset.

Kirjaudu sisään

Voittostrategia

Tekoälypohjainen analyysi tämän tarjouskilpailun vaatimuksista, mahdollisuuksista ja haasteista. Saat strategisia näkemyksiä voittomahdollisuuksiesi maksimoimiseksi.

75%
Arvioitu voittomahdollisuusKohtalainen sopivuus

This tender for Jõgeva municipality's road repair in 2026 is heavily cost-driven, with 100% of the evaluation based on the cost per ton for patching. Bidders must demonstrate technical capability in spray-chipping and mechanized repair, while meticulously adhering to submission requirements. The primary winning strategy revolves around aggressive cost optimization and precise execution of the specified technical method.

Keskeiset voittoviestit

Most Cost-Effective Solution for Jõgeva's Road Repair

Proven Expertise in Spray-Chipping for Durable Road Repairs

Efficient and Precise Application of Repair Materials

Keskeiset mahdollisuudet
Aggressive cost optimization to secure the 100% cost-based evaluation criterion.
Demonstrate technical superiority through the specified mechanized repair device.
Leverage joint bids to pool resources and potentially achieve better cost efficiencies.
Keskeiset haasteet
Intense price competition due to 100% cost evaluation.

Conduct thorough cost analysis to identify all possible efficiencies in materials, labor, and equipment. Explore bulk purchasing of materials and optimize crew deployment. Consider a lean operational model.

Strict adherence to technical specifications for spray-chipping and equipment.

Ensure all equipment meets the precise dosing and tracking system requirements. Provide detailed technical specifications or certifications to prove compliance. Train crews on the exact spray-chipping methodology.

Potential for errors in complex submission documents like the ESPD (.xml).

Allocate sufficient time for ESPD completion and validation. Engage with procurement specialists or use reliable software for .xml generation and checking. Double-check all data against tender requirements.

Ihanteellinen tarjoajaprofiili
A specialized road maintenance contractor with proven experience in spray-chipping techniques and access to modern, mechanized repair equipment featuring precise dosing and tracking systems. The ideal bidder will have a highly efficient operational model allowing for significant cost savings on materials, labor, and equipment, enabling them to submit the lowest cost per ton.
Keskeiset vaatimukset
Use of specific spray-chipping method
Use of mechanized repair device with precise dosing and tracking system
Submission of cost table (Lisa 1) detailing work volume and unit price
Completion and submission of ESPD (v2.0) in .xml format
Absence of sanctions
Keskeiset erottuvuustekijät
The lowest cost per ton achieved through operational efficiency and optimized material sourcing.
Demonstrated precision and efficiency of the mechanized repair device, leading to higher quality repairs and potentially lower material usage.
A clear and concise cost breakdown in Lisa 1, showing transparency and a deep understanding of cost drivers.
Sosiaalisen arvon mahdollisuudet
While not explicitly required, consider a statement about local employment during the repair period, even if it's a small commitment. This can be a subtle differentiator if competitors do not mention it.
Tarjouksen painopisteet
Cost of patching holes and cracks per ton (EUR/ton)100.0%

Achieve the absolute lowest cost per ton by optimizing all cost components (materials, labor, equipment, overhead). Conduct a granular cost analysis and ensure the submitted price is competitive and sustainable.

Suositukset7
Aggressively Price for the Lowest Cost Per Ton
KriittinenKorkea vaiva

Given the 100% weightage on cost, every effort must be made to submit the lowest possible cost per ton. This requires a deep dive into operational efficiencies, material sourcing, and labor costs. Consider a slightly lower profit margin if necessary to secure the contract, given the estimated value.

Directly impacts the evaluation score and win probability.
Verify Mechanized Repair Device Compliance
KriittinenKeskitason vaiva

Ensure the chosen mechanized repair device unequivocally meets the 'precise dosing and tracking system' requirement. Provide clear evidence or specifications in the bid to demonstrate this compliance. This is a technical non-negotiable.

Prevents disqualification on technical grounds.
Meticulous ESPD (.xml) Completion and Validation
KriittinenKorkea vaiva

Allocate significant time and resources to accurately complete the ESPD in .xml format. Use reliable tools for generation and validation. A single error can lead to disqualification. Cross-reference all information with other tender documents.

Ensures eligibility and avoids administrative disqualification.
Transparent and Detailed Cost Table (Lisa 1)
KorkeaKeskitason vaiva

Complete Lisa 1 with utmost accuracy and detail. Break down costs for materials, equipment, and labor clearly. This transparency can build confidence with the contracting authority and demonstrate a thorough understanding of the project's cost structure.

Supports the proposed cost and demonstrates bidder competence.
Thorough Review of Draft Contract (Hankelepingu projekt)
KorkeaKeskitason vaiva

Carefully review the draft contract to understand all obligations, liabilities, and payment terms. Identify any potential risks or areas that might impact cost or operational execution. Address any concerns proactively through clarification requests if permitted.

Prevents future contractual disputes and financial risks.
Highlight Spray-Chipping Expertise
KeskitasoMatala vaiva

While not a primary evaluation criterion, subtly emphasize the company's experience and expertise in the specific spray-chipping method. This can be done through a brief mention in the executive summary or a dedicated section if space allows, reinforcing technical capability.

Builds confidence in technical execution.
Consider a Local Employment Statement
MatalaMatala vaiva

If feasible, include a brief statement about utilizing local labor where possible during the execution of the works. This is a low-effort addition that can provide a minor positive impression, especially if competitors do not address social aspects.

Minor positive impression, potential differentiator.
Kilpailuasema
Position as the most cost-effective provider by demonstrating superior operational efficiency and a lean cost structure. Emphasize the precision of the mechanized equipment as a key enabler of this efficiency, leading to high-quality repairs at the lowest price.

Kilpailijat

Päivitä nähdäksesi, mitkä yritykset todennäköisesti tekevät tarjouksen tästä hankinnasta, perustuen historialliseen hankintadataan.

Kirjaudu sisään

Vaatimukset ja pätevyydet

15 vaatimusta 5 kategoriassa

Jättäminen (5)
Pakollinen (1)
Vaatimustenmukaisuus (5)
Tekninen (2)
Taloudellinen (2)
SUBMISSION REQUIREMENTS5
--Bidders must review the draft contract (Hankelepingu projekt.docx).
--Bidders must complete and submit the ESPD (v2.0) in .xml format (Note: AI analysis of .xml is not supported, manual review required).
--Bidders must provide confirmations as outlined in vastavustingimused.pdf.
MANDATORY EXCLUSION GROUNDS1
--Absence of sanctions.
ELIGIBILITY REQUIREMENTS5
--Bidders must confirm compliance with tender conditions.
--Bidders must confirm the conformity of their bid.
--Bidders must submit cost information.
TECHNICAL CAPABILITY REQUIREMENTS2
--Bidders must use a specific spray-chipping method.
--Bidders must use a mechanized repair device with precise dosing and tracking system.
FINANCIAL REQUIREMENTS2
--Cost per ton for patching holes and cracks will be the primary evaluation criterion.
--Bidders must submit a cost table (Lisa 1) detailing work volume and unit price, including materials, equipment, and labor.

Vaatimusten esikatselu

Rekisteröidy nähdäksesi täydelliset vaatimukset ja analyysin

Asiakirjat

6 asiakirjaa saatavilla AI-yhteenvedoilla

VastavustingimusedPDF
307460_vastavustingimused.pdf -- 6.5 KB

The contracting authority requires bidders to confirm joint offers, bid compliance, cost submission, and equivalency, as well as the absence of sanctions.

Pakkuja esitab Lisa 1- maksumuse tabeliDOC
Lisa 1- maksumuse tabel.docx -- 13.4 KB

The bidder must submit Appendix 1, the cost table, detailing the scope of work and unit price, which includes materials, equipment usage, and labor.

Hindamiskriteeriumid ja hinnatavad näitajadPDF
307460_hindamiskriteeriumid.pdf -- 2.9 KB

The tender evaluation criteria focus on the cost of patching holes and cracks per ton, with the lowest price receiving the maximum score.

Hankepass täiendatavate selgitustegaPDF
307460_hankepass_taiendavate_selgitustega.pdf -- 33.6 KB

The procurement passport is an initial self-declaration by the company, containing the conditions set by the contracting authority and the format of expected responses, but is not a document to be filled out.

Hankelepingu projektDOC
Hankelepingu projekt.docx -- 34.5 KB

The draft contract project outlines the terms and legal framework for the Jõgeva municipality's asphalt road repair 2026, which contractors must review.

Tehniline kirjeldusDOC
Tehniline kirjeldus.docx -- 18.1 KB

The contracting authority Jõgeva Vallavalitsus is seeking bids for asphalt road repair works in 2026, requiring a specific spray-chip method and mechanized repair equipment with precise dosing and tracking systems.

Asiakirjojen esikatselu

Rekisteröidy nähdäksesi asiakirjojen yhteenvedot ja analyysin

75
Hyvä

Hankinnan laatupisteet

This tender for road repair is generally well-structured with clear technical requirements and evaluation criteria. Practicality could be improved with more detailed submission guidelines for certain documents.

Pisteiden erittely

Lainsäädännön noudattaminen75/100

The tender appears to adhere to standard legal procurement practices, with a clear CPV code, specified organization, and reasonable deadlines. No explicit disputes or regulatory issues are noted, contributing to a good score. The procedure is identified, and compliance is expected.

Selkeys80/100

Technical specifications for the spray-chipping method and required equipment are clearly outlined. The evaluation criterion (cost per ton) is well-defined, though the specific weighting of 'relative_weighting' could be more granular. The description is concise.

Täydellisyys70/100

Most basic information is present, including estimated value, contract start date, and duration. However, the draft contract and technical specifications are marked as 'not required' for submission, which could lead to confusion if they are crucial for bid preparation. The ESPD .xml analysis limitation is a practical incompleteness for AI tools.

•Draft contract and technical specifications marked as 'not required' for submission.
Reiluus85/100

The tender is open to joint bids and specifies objective evaluation criteria (cost per ton). The use of e-procurement and disclosed value promotes fairness. Requirements are generally objective, without explicit tailoring to specific companies.

Käytännöllisyys65/100

E-submission and e-procurement are utilized. However, the requirement to manually review the ESPD due to AI analysis limitations and the lack of explicit guidance on the 'Hankepass' document's role impacts practicality. The document URL requirement is not explicitly met within the provided data.

•AI analysis limitation for ESPD .xml.
•Ambiguity regarding the 'Hankepass' document's role.
Tietojen yhdenmukaisuus90/100

Key fields such as title, reference, organization, deadlines, and value are consistently populated. There are no indications of suspension or disputes. Dates appear logical and sequential.

Kestävyys50/100

The tender does not explicitly mention green procurement, social aspects, or innovation. Funding source is local budget, not explicitly EU-funded. This results in a moderate score as these aspects are not integrated.

•No explicit green procurement criteria.
•No explicit social or innovation criteria.

Vahvuudet

Clear technical specifications for road repair method.
Objective and transparent evaluation criteria (cost per ton).
Use of e-procurement and electronic submission.
Well-defined basic tender information.

Huolenaiheet

Ambiguity regarding submission requirements for certain documents (Hankepass, draft contract).
Practicality issues with ESPD .xml analysis.
Lack of explicit sustainability or innovation considerations.

Suositukset

1. Clarify the submission requirements for all listed documents, especially 'Hankepass' and the draft contract.
2. Provide explicit guidelines or a URL for accessing all tender documents.
3. Consider incorporating specific sustainability or innovation criteria in future tenders.

Tekoälyn pisteytyksen esikatselu

Rekisteröidy nähdäksesi täydelliset vaatimukset ja analyysin

Täydellinen laatupisteanalyysi
Yksityiskohtainen osapisteiden erittely
Vahvuudet ja huolenaiheet -näkemykset
Strategiset suositukset

Luottokorttia ei vaadita • Asennus 2 minuutissa