Skip to main content
Tenders

Zakup i montaż wyposażenia Szkoły Realnej w Tallinnie (Estonia pst 6)

Otwarty
Termin składania ofert
Pozostało 24 dni
Kwiecień 20, 2026
Szczegóły umowy
Kategoria
Dostawy
Numer Referencyjny
306512
Wartość
€2,500,000
Lokalizacja
Estonia
Published
Marzec 19, 2026
Kod CPV
Kryteria oceny
Part 1. Main building and new building purchased furniture total cost excluding VAT100%
Part 2. Main building and new building custom-made furniture total cost excluding VAT100%
Harmonogram Projektu

Ogłoszenie przetargu

Marzec 19, 2026

Termin składania pytań

Kwiecień 13, 2026

Termin składania ofert

Kwiecień 20, 2026

Otwarcie ofert

Kwiecień 20, 2026

Prawdopodobieństwo wygranejPRO
🔒
Uaktualnij do Professional
Zobacz szacowane prawdopodobieństwo wygranej na podstawie danych historycznych.
Uaktualnij do wersji profesjonalnej →
Analityka zamawiającegoPRO
🔒
Odblokuj analitykę zamawiającego
Zobacz wzorce wydatków, preferowane procedury i więcej.
Uaktualnij do wersji profesjonalnej →
Analiza sektoraPRO
🔒
Odblokuj analizę sektora
Zobacz średnie ceny zwycięskie, poziomy konkurencji i trendy rynkowe.
Uaktualnij do wersji profesjonalnej →
Budget
€2,500,000
Duration
Not specified
Lokalizacja
Estonia
Type
Dostawy
75
Ocena Jakości/100
Dobra
Benchmark rynkowy
Śr. cena wygrywająca
€72,774
Śr. liczba ofert
3.3
Konkurencja
Średnia
Zwycięzcy MŚP
93%
884 przeanalizowanych zamówień

Oryginalny Opis Przetargu

Przedmiotem umowy jest wyposażenie budynku głównego i dobudówki Szkoły Realnej w Tallinnie, obejmujące zakup i dostawę mebli gotowych, mebli na zamówienie, elementów wystroju wnętrz i wyposażenia (dalej jako towary), a także montaż, instalację, podłączenie do mediów, przygotowanie do użytku oraz szkolenie pod wskazanym przez kupującego adresem: Estonia pst 6, Tallinn.
Electronic Submission

Analiza ryzyka

Zaloguj się, aby korzystać z analizy ryzyka.

Zaloguj się

Strategia wygrywania

Zaloguj się, aby uzyskać dostęp do rekomendacji strategii wygrywania.

Zaloguj się

Konkurenci

Ulepsz plan, aby zobaczyć, które firmy prawdopodobnie złożą ofertę w tym przetargu, na podstawie historycznych danych zamówień publicznych.

Zaloguj się

Wymagania i Kwalifikacje

15 wymagań w 5 kategoriach

Składanie (3)
Obowiązkowe (1)
Zgodność (2)
Techniczne (6)
Finansowe (3)
SUBMISSION REQUIREMENTS3
--The tender is for the procurement and installation of furniture for Tallinna Reaalkool.
--The deadline for submission is 2026-04-20 09:00:00.
--The value of the tender is 2500000.0 EUR.
MANDATORY EXCLUSION GROUNDS1
--Bidders shall not involve subcontractors or suppliers associated with the Russian Federation.
ELIGIBILITY REQUIREMENTS2
--For joint bidders, a power of attorney must be provided, authorizing one joint bidder to represent all joint bidders in the tender procedure and contract conclusion.
--Business secrets must be explained.
TECHNICAL CAPABILITY REQUIREMENTS6
--The subject of the contract is the purchase, delivery, installation, and ensuring readiness for use of the interior of Tallinna Reaalkool, which must comply with the technical specifications and quality requirements.
--Bidders must submit a technical proposal for the purchase furniture (Part 1) and custom-made furniture (Part 2).
--For custom-made furniture (Part 2), bidders must confirm compliance with requirements and provide additional information on equivalent products if necessary.
FINANCIAL REQUIREMENTS3
--Bids will be evaluated primarily based on the lowest total cost excluding VAT, with both parts (purchase furniture and custom-made furniture) having a 100% weight.
--Bidders must submit a cost form for custom-made furniture (Part 2), listing specific products and quantities.
--Bidders must submit a cost form for purchase furniture (Part 1), for the procurement and installation of purchase furniture for Tallinna Reaalkool.

Podgląd wymagań

Zarejestruj się, aby zobaczyć pełne wymagania i analizę

Dokumenty

13 dokumentów dostępnych z podsumowaniami AI

VastavustingimusedPDF
306512_vastavustingimused.pdf -- 29.7 KB

The contracting authority requires bidders to confirm they will not engage subcontractors or suppliers linked to the Russian Federation, provide a power of attorney for joint bidders, and clarify any business secrets.

Lisa_2_Maksumuse_vorm_Erilahendusega mööbel_(osa 2)XLS
Lisa_2_Maksumuse_vorm_Erilahendusega mööbel_(... -- 45.5 KB

The contracting authority requests the submission of a cost form for custom-made furniture, listing specific products and quantities.

Lisa_2_Maksumuse_vorm_Ostumööbel_(osa 1)XLS
Lisa_2_Maksumuse_vorm_Ostumööbel_(osa 1).xlsx -- 34.1 KB

This document is a cost form where the bidder must submit a bid for the procurement and installation of office furniture for Tallinn Real School.

Lisa 5 Peahoone tehnilise ettepaneku vorm osa 1XLS
Lisa 5_OSA1 Peahoone Ostumööbel Tehniline ett... -- 21.4 MB

Bidders must submit a technical proposal for the procurement and installation of furniture according to the specified requirements, accurately indicating offered materials/products and providing necessary attachments.

Lisa 5. Uue hoone tehnilise ettepaneku vorm osa 1XLS
Lisa 5_OSA1 Uue hoone Ostumööbel Tehniline et... -- 26.5 MB

This document is a technical proposal form that must be completed and submitted with the bid, detailing the offered furniture's compliance with technical requirements.

Lisa 5_OSA 2 Peahoone Erilahendusega mööbel. Tehniline ettepanek (Vorm)XLS
Lisa 5_OSA2 Peahoone Erilahendusega mööbel ... -- 4.5 MB

Bidders must submit a technical proposal for custom-designed furniture, confirming compliance with requirements and providing additional information for equivalent products if applicable.

Lisa 5_OSA 2 Uue hoone Erilahendusega mööbel. Tehniline ettepanek (Vorm)XLS
Lisa 5_OSA2 Uue hoone Erilahendusega mööbel... -- 14.3 MB

Bidders must submit a technical proposal for special-solution furniture for the new building, confirming or describing the compliance of offered products with technical requirements and providing additional documentation if necessary.

Hindamiskriteeriumid ja hinnatavad näitajadPDF
306512_hindamiskriteeriumid.pdf -- 5.3 KB

The contracting authority will evaluate bids primarily based on the lowest total cost excluding VAT, with the cost of both lots (purchased furniture and custom-made furniture) carrying a 100% weight.

Hankepass täiendatavate selgitustegaPDF
306512_hankepass_taiendavate_selgitustega.pdf -- 75.6 KB

The procurement passport is an initial self-declaration by the economic operator, containing the conditions set by the contracting authority and the format of expected responses, but is not intended for completion itself.

Lisa 1 Tehniline kirjeldusDOC
Lisa 1_Tehniline kirjeldus.docx -- 33.3 KB

The subject of the tender is the purchase, delivery, installation, and commissioning of furniture and equipment for Tallinn Real School, which must meet the technical specifications and quality requirements.

Lisa 3 Ühispakkuja volikiriDOC
Lisa 3 Ühispakkujate volikiri.docx -- 23.0 KB

This document is a joint bidder's power of attorney, authorizing one of the joint bidders to represent all joint bidders in the tender procedure and contract signing.

Lisa 4 Hankelepingu kavandDOC
Lisa 4_Hankelepingu kavand.docx -- 51.7 KB

This document is a draft of the purchase agreement, outlining the seller's obligations to deliver and install goods according to the technical specifications and the buyer's obligation to accept and pay for the goods.

Riigihanke alusdokumentDOC
Riigihanke alusdokument.docx -- 52.5 KB

The public procurement foundation document outlines the procurement and installation of furniture for Tallinn Real School, including the purchase, delivery, and installation of furniture, and specifies the tender procedure conditions.

Podgląd dokumentów

Zarejestruj się, aby zobaczyć podsumowania i analizę dokumentów

75
Dobra

Ocena Jakości Przetargu

This tender for furniture procurement and installation for Tallinna Reaalkool is generally well-structured, with clear technical requirements and a straightforward evaluation based on cost. However, it lacks explicit mention of contract duration and sustainability criteria.

Szczegółowy Wynik

Zgodność z przepisami75/100

The tender adheres to standard procurement procedures, including proper CPV codes and a clear process. Deadlines appear reasonable. The exclusion of subcontractors associated with the Russian Federation is a specific, but not necessarily unfair, requirement in the current geopolitical context. No disputes are noted.

Przejrzystość80/100

The description of the subject matter is clear, detailing the scope of furniture procurement and installation. Technical requirements are documented through various annexes. Evaluation criteria are stated as primarily cost-based, though specific weighting details are missing.

Kompletność70/100

Most basic information is present, including estimated value, deadlines, and organization. However, the contract duration is not explicitly specified, which is a notable omission. Several required submission forms are listed.

Missing contract duration
Uczciwość85/100

The tender is conducted via e-procurement, promoting transparency. The value is disclosed, and criteria are objective (lowest cost). The requirement to exclude subcontractors linked to the Russian Federation is a geopolitical consideration rather than a company-specific tailoring. Full document access is implied through the e-procurement platform.

Praktyczność65/100

E-submission is mandated. The opening place is provided via a URL. Financing information and contract start date are not explicitly detailed, impacting practicality for bidders needing to plan resources.

Missing financing information
Missing contract start date
Spójność danych90/100

Key fields such as title, reference, organization, value, and deadlines are populated. There are no indications of suspension or disputes. Dates are logically presented.

Zrównoważony rozwój50/100

There is no explicit mention of green procurement, social aspects, or innovation within the tender documents. The tender is not indicated as EU funded.

No green procurement criteria
No social criteria

Mocne strony

Clear technical specifications and scope of work
Mandatory e-submission and e-procurement
Objective evaluation criterion (lowest cost)
Detailed submission forms for technical and cost proposals

Wątpliwości

Missing contract duration
Lack of explicit sustainability criteria
Absence of financing information and contract start date

Rekomendacje

1. Specify the contract duration clearly.
2. Incorporate sustainability and social responsibility criteria.
3. Provide details on financing and the expected contract start date.

Podgląd oceny AI

Zarejestruj się, aby zobaczyć pełne wymagania i analizę

Pełna analiza oceny jakości
Szczegółowy rozkład ocen cząstkowych
Mocne strony i obawy – informacje
Rekomendacje strategiczne

Karta kredytowa nie jest wymagana • Konfiguracja w 2 minuty

Nowa usługa

Chcesz, żebyśmy zajęli się tym przetargiem?

Nasi eksperci ds. zamówień publicznych przygotowują wszystko. Sprawdzone rozwiązanie — Ty przeglądasz, zatwierdzasz i składasz.

~1hTylko Twój czas
80%+80%+
$0Z góry
Zobacz pełne porównanie
Bez TaaSZ TaaS
40–80 godz.
Czas przygotowania
~1 godz.
Tylko Twój czas
15–25%
Średni wskaźnik wygranych
80%+
Wskaźnik wygranych
Ryzyko błędów
Ręczna kontrola
Ekspert QA
Kontrola zgodności
Robisz wszystko sam
Zajmujesz się wszystkim
My robimy wszystko
Kompleksowa obsługa
Wygrajmy ten przetarg!
Płacisz tylko w przypadku wygranej — tylko opłata za sukces · Zaufanie ponad 400 firm
Lub zrób to sam

Dodaj do pipeline'u