Potrzebujesz pomocy eksperta ds. przetargów? Zobacz naszą usługę przygotowania przetargów
Przetargi

DLSITT1087 - Dostawa Front End K14 dla Diamond-II

Zamknięty

Termin składania ofert minął

Termin składania ofert w tym przetargu minął i nie przyjmujemy już zgłoszeń. Poniższe informacje zostały zachowane w celach informacyjnych.

Przeglądaj Aktywne Przetargi
Termin składania ofert
Przeterminowany
27 lutego 2026
Szczegóły umowy
Kategoria
Open Procedure
Numer Referencyjny
007444-2026
Wartość
£540,000
Lokalizacja
Berkshire, Buckinghamshire and Oxfordshire, Wielka Brytania
Opublikowano
16 sierpnia 2026
Kod CPV
Harmonogram Projektu

Ogłoszenie przetargu

28 stycznia 2026

Termin składania pytań

20 lutego 2026

Termin składania ofert

27 lutego 2026

Data rozpoczęcia kontraktu

29 marca 2026

Budżet
£540,000
Czas trwania
20 miesiące
Lokalizacja
Berkshire, Buckinghamshire and Oxfordshire
Typ
Open Procedure
69
Ocena Jakości/100
Dobra

Oryginalny Opis Przetargu

Zlokalizowany w Harwell Science & Innovation Campus w Oxfordshire, Diamond Light Source (DLS) jest wiodącym ośrodkiem nauki, inżynierii i innowacji. DLS umożliwia badaczom z kręgów akademickich i przemysłowych badanie struktury i zachowania otaczającego nas świata na poziomie atomowym i molekularnym. Aby nadal dostarczać przełomową naukę, którą umożliwia Diamond, obiekt jest modernizowany do Diamond-II, skoordynowanego programu rozwoju, który łączy modernizację głównej maszyny z nowymi instrumentami i uzupełniającymi ulepszeniami optyki, detektorów, środowiska próbek i możliwości dostaw, a także obliczeń, a także metod zintegrowanych i korelacyjnych. Będzie to transformacyjne pod względem prędkości i rozdzielczości przestrzennej oraz zapewni użytkownikom usprawniony dostęp do ulepszonych instrumentów dla nauk o życiu i nauk ścisłych. Zakres umowy obejmuje projektowanie, produkcję, dostawę, testowanie i dostarczenie jednego Front End dla linii wiązki K14 w Diamond-II. Front End będzie zlokalizowany na obszarze o ograniczonym dostępie, dlatego musi być zdolny do ciągłej pracy przez długi czas bez konserwacji. Ramy nośne muszą mieć sztywną konstrukcję i być skonstruowane w taki sposób, aby minimalizować wpływ drgań podłoża. Ramy nośne muszą być podparte od podłogi za pomocą trzech ręcznie regulowanych stóp, aby umożliwić ich dokładne wyznaczenie położenia. Dodatkowe informacje można znaleźć w specyfikacji.

Analiza ryzyka

Analiza ryzyka nie jest jeszcze dostępna dla przetargów tego kraju. Obecnie obsługiwane: Estonia, Łotwa, Litwa, Polska, Francja, Wielka Brytania, Dania, Holandia, Norwegia i Finlandia.

Strategia wygrywania

Uzyskaj strategię wygrywania opartą na sztucznej inteligencji, dopasowaną do tego przetargu. Obejmuje wskaźnik prawdopodobieństwa wygranej, kluczowe szanse i wyzwania, zalecane obszary oferty, analizę pozycji konkurencyjnej oraz praktyczne rekomendacje maksymalizujące Twoje szanse.

Zaloguj się

Konkurenci

Ulepsz plan, aby zobaczyć, które firmy prawdopodobnie złożą ofertę w tym przetargu, na podstawie historycznych danych zamówień publicznych.

Zaloguj się

Wymagania i Kwalifikacje

18 wymagań w 5 kategoriach

Składanie (3)
Obowiązkowe (1)
Zgodność (2)
Techniczne (11)
Finansowe (1)
SUBMISSION REQUIREMENTS3
--Bids must be submitted by the deadline: 2026-02-27T12:00:00+00:00.
--Suppliers must register on the Diamond website to access tender documents and express interest.
--Suppliers must register on the UK Government's Central Digital Platform to access tender documents and express interest.
MANDATORY EXCLUSION GROUNDS1
--No specific mandatory exclusion grounds are explicitly stated in the provided information.
ELIGIBILITY REQUIREMENTS2
--Suppliers must register on the Diamond website.
--Suppliers must register on the UK Government's Central Digital Platform.
TECHNICAL CAPABILITY REQUIREMENTS11
--The contractor must be capable of designing the K14 beamline Front End.
--The contractor must be capable of manufacturing the K14 beamline Front End.
--The contractor must be capable of supplying the K14 beamline Front End.
FINANCIAL REQUIREMENTS1
--No specific financial requirements for the bidder (e.g., turnover, guarantees) are explicitly stated in the provided information.

Podgląd wymagań

Zarejestruj się, aby zobaczyć pełne wymagania i analizę

Dokumenty

3 dokumentów dostępnych z podsumowaniami AI

OCDS RecordDOC
007444-2026_ocds_record.json

This tender seeks a supplier to design, manufacture, supply, test, and deliver a specialized, continuously operable Front End for the K14 beamline at Diamond Light Source's Diamond-II upgrade, featuring rigid, vibration-minimizing support frames with adjustable feet.

OCDS Release PackageDOC
007444-2026_ocds_release.json

This tender seeks a supplier to design, manufacture, supply, test, and deliver a continuously operable Front End for the Diamond-II K14 beamline, requiring rigid, adjustable support frames.

Official PDF VersionPDF
007444-2026_official.pdf

This tender seeks a contractor to design, manufacture, supply, test, and deliver a K14 beamline Front End for the Diamond-II upgrade, requiring continuous operation, rigid support frames, and adjustable feet.

Podgląd dokumentów

Zarejestruj się, aby zobaczyć podsumowania i analizę dokumentów

69
Dobra

Ocena Jakości Przetargu

This tender documentation provides a clear technical description but suffers from significant gaps in evaluation criteria and explicit bidder financial requirements, impacting transparency and fairness.

Szczegółowy Wynik

Zgodność z przepisami75/100

The tender defines the procedure type and CPV code appropriately. However, the explicit absence of mandatory exclusion grounds and specific financial requirements for bidders, as noted in the AI-extracted requirements, represents a notable gap in legal compliance and disclosure. The missing reveal date is also a minor concern.

Missing explicit mandatory exclusion grounds
Missing explicit financial requirements for bidders
Przejrzystość60/100

The project and technical requirements are clearly described and understandable. However, the critical absence of specified evaluation criteria is a major flaw, preventing bidders from understanding how their proposals will be assessed and significantly reducing overall clarity.

No evaluation criteria specified
Kompletność70/100

Basic information such as title, reference, organization, value, duration, and deadlines are well-provided. However, the tender is incomplete due to the explicit lack of evaluation criteria, mandatory exclusion grounds, and specific financial requirements for bidders. The mention of 'Divided into Parts' without further detail also indicates incompleteness.

No evaluation criteria specified
Missing explicit mandatory exclusion grounds
Uczciwość65/100

The absence of evaluation criteria is a significant fairness concern, as it hinders objective assessment and transparency. The lack of electronic submission also presents a barrier to equal access and efficiency. While technical requirements are specific, they appear functional rather than tailored.

No evaluation criteria specified
No electronic submission (e-submission)
Praktyczność65/100

Key practical details like contract start date and duration are clearly specified. However, the noted absence of electronic submission is a significant practical drawback in modern procurement, potentially increasing administrative burden for bidders.

No electronic submission (e-submission)
Spójność danych90/100

The tender data is largely consistent, with key fields populated and no disputes or suspensions. Minor inconsistencies include empty fields for 'Liable Person' and procedure codes, and the lack of detail for 'Divided into Parts'.

Empty 'Liable Person' field
Empty codes for 'Type' and 'Procedure'
Zrównoważony rozwój50/100

The tender does not explicitly incorporate green procurement, social aspects, or innovation criteria within its requirements or evaluation framework. While the underlying project is innovative, the tender itself does not seek or reward sustainable or innovative solutions from bidders.

No explicit green procurement criteria
No explicit social criteria

Mocne strony

Clear description of the project and technical requirements
Estimated value, contract duration, and key dates are specified
Documents are available (summaries provided)
Open procedure for broad participation
CPV code and NUTS code are provided

Wątpliwości

Absence of explicit evaluation criteria
Lack of explicitly stated mandatory exclusion grounds and financial requirements for bidders
No electronic submission method
Contract stated as 'Divided into Parts' but no details provided
No explicit sustainability, social, or innovation criteria

Rekomendacje

1. Clearly define and publish comprehensive evaluation criteria to ensure transparency and fairness for all bidders.
2. Explicitly state all mandatory exclusion grounds and specific financial requirements for bidders in the tender documentation.
3. Implement an electronic submission platform to enhance accessibility, efficiency, and security for bidders.

Podgląd oceny AI

Zarejestruj się, aby zobaczyć pełne wymagania i analizę

Pełna analiza oceny jakości
Szczegółowy rozkład ocen cząstkowych
Mocne strony i obawy – informacje
Rekomendacje strategiczne

Karta kredytowa nie jest wymagana • Konfiguracja w 2 minuty

Dodaj do pipeline'u